6701 Garden Rd. Unit 3
Riviera Beach, FL 33404 USA
Toll Free: 1 (866) 858-4982
Local: (561) 741-7022
Electric Pressure Washer
These are the largest heavy duty electric pressure washer units in our line. The pressure range can vary from 2,000 to 3,000 PSI, water flow 2.2 to 4.0 GPM and the horsepower 3.0 to 10 HP. Models are available in 220 V, 460 V and 575 V. They are powered by the electric Baldor motor and are equipped with 4 size nozzles ( 0°, 15°, 25° and 40° tip), trigger gun, pressuehose, and thermal relief valve. Choose from GENERAL or COMET pumps. The unit is attached to a large two-hand handle powder coated frame and supported by two 13" pneumatic tires. Very easy to maneuver. They are perfect for both outdoor and indoor use. These electric pressure washer models have many great features such as chemical injector kit designed for easy cleaning solution application, 50 FT of pressurehose for convenient large surfaces power washing, thermal relief valve for pump protection, 4 spray tips usable for any type of cleaning job, trigger gun and insulated lance for secure grip and smooth operation.
All pressurewashers are factory tested before being delivered to the customer.
Special price reduction on selected models …now save up to 50%
Order Online or Call Toll Free 866-858-4982
Direct Drive Pressure Washers - 2000 to 3000 PSI
Electric Powered Unit
Features:
- 1500 to 3000 PSI at 2.2 to 4.0 GPM
- 3.0 to 10 HP Baldor Electric Motor: 220, 230, or 460 V, 1 or 3 Phase at 7 to 32 amps (1 year warranty)
- Pump: Comet or AR (5 year warranty)
- Direct Drive
- 4,400 to 12,000 Cleaning Units
- Chemical Injector Kit
- Adjustable Pressure
- Thermal Relief Valve (145°)
- 50 FT Steel braided Hose
- 4 Quick-Connect Spray Tips
- 36" Insulated Lance
- 4,000 PSI Gun
- 13" Pneumatic Tires
- Black Powder Coated Frame
- Switch, Cord and Plug are NOT included (except B153EA and B205EG)
- Weight 135 to 230 lbs
Choose Voltage (230, 460) in shopping cart.
| MODEL | PSI | GPM | MOTOR | VOLTAGE | PRICE |
| B153EA | 1500 | 3.0 | 3.0 HP - BALDOR | 220V / 1Ph / 12Amp | $1,314.90 |
| B205EG | 2000 | 3.5 | 5.0 HP - BALDOR | 220V / 1Ph / 22 Amp | $1,694.35 |
| B205EA | 2000 | 3.5 | 5.0 HP - BALDOR | 220V / 1Ph / 23Amp | $1,783.65 |
| B205E34A | 2000 | 3.5 | 5.0 HP - BALDOR | 220V or 460V / 3Ph / 13 or 7 Amp | $1,727.85 |
| B2775EA | 2700 | 3.5 | 7.5 HP - BALDOR | 230V / 1Ph / 32 Amp | $2,149.25 |
| B2775E3AHE | 2700 | 3.5 | 7.5 HP - BALDOR | 220V or 460V / 3Ph / 20 or 10 Amp | $2,126.95 |
| B3010E34AHE | 3000 | 4.5 | 10 HP - BALDOR | 220V or 460V / 3Ph / 26 or 14 Amp | $2,179.05 |
Electric Powered Unit
Features:
- 1500 to 4000 PSI at 3.0 to 4.0 GPM (depending on model)
- 3.0 to 10 HP Marathon Electric Motor: 230V, Single phase at 12 to 44 amps (1 year warranty)
- Pump: General or AR (5 year warranty)
- Direct Drive
- 3,300 to 16,000 Cleaning Units
- Chemical Injector Kit
- Adjustable Pressure
- Thermal Relief Valve
- 50 FT Steel braided Hose
- 4 Quick-Connect Spray Tips
- 36" Insulated Lance
- 4,000 PSI Gun
- 10" Pneumatic Tires
- Aircraft grade Aluminum frames (no welds - Lifetime Warranty)
- 12 Ft. Cord, No Plug (On/Off Switch located on Unit)
- Weight 70 to 235lbs.
- Ship Dimensions: 48" L x 40" W x 31" H
| MODEL | PSI | GPM | PUMP | MOTOR | VOLTAGE | PRICE |
| EE2015G | 1500 | 3.0 | General | 2.0 HP - Marathon | 115V / 18 Amp | $1,497.50 |
| EE3015G | 1500 | 3.0 | General | 3.0 HP - Marathon | 230V / 12 Amp | $2,041.35 |
| EE3530G | 3000 | 3.5 | General | 7.5 HP - Marathon | 230V / 35 Amp | $3,218.25 |
| EE3540A | 4000 | 3.5 | AR | 10 HP - Marathon | 230V / 44 Amp | $3,739.20 |
Commercial Cold Water Electric Pressure Washer
Features:
- 3000 - 3600 PSI at 3.5 -4.0 GPM (depending on model)
- 220 V, 1PH, 1750 RPM, 7.5 HP TEFC Motor
- 1.15 Service Factor with Heavy Duty Cam Switch
- Direct Drive Triplex Pump
- 10,500 Cleaning Units
- Low Pressure Chemical Injection
- Adjustable Pressure
- Thermal Relief valve
- 50’ of High Pressure Hose.
- 4 High Pressure Nozzles, 1 Soaper Nozzle
- 36” Gun and Wand Assembly
- 13” Pneumatic Tires
- Fully Welded Steel and Powder Coated Frame
- 25 Foot Electrical Cord
- Dimensions; 48x25x30 Inches
- Weight; 350 LBS
| MODEL | PSI | GPM | PUMP | MOTOR | VOLTAGE | PRICE |
| 11-PW648F | 1500 | 2.2 | EK | 2 HP TEFC | 110 V | $1,182.50 |
| 11-PW7691 | 3000 | 3.5 | General | 7.5 HP TEFC | 220 V | $2,896.25 |
| 11-PW730B | 3600 | 3.6 | EK | 7.5 HP TEFC | 220 V | $2,345.00 |
| 11-PW17D6 | 3000 | 4.0 | EK | 7.5 HP TEFC | 220 V | $2,502.50 |
Electric Marine Mount High Pressure Cleaning System
Features:
- 2000 PSI at 4.0 GPM
- General Pump
- 5 HP TEFC Electric Motor: 220v – 1ph – 1.15 Service Factor
- 25ft Electrical Cord Length
- 8,000 Cleaning Units
- Electric Start/Stop with Time Delay
- Fully Welded/Powder Coated Steel Stationary Flat Base Frame
- Adjustable Pressure
- Thermal Relief Valve
- 50’ of High Pressure Hose.
- 4 High Pressure Nozzles
- 36” Gun and Wand Assembly
- Dimensions; 46x30x29Inches
- Weight; 202 LBS
| MODEL | PSI | GPM | PUMP | MOTOR | VOLTAGE | PRICE |
| 11-PW595D | 2000 | 4.0 | General | 5 HP TEFC | 220 V | $3,170.00 |
Industrial Cold Water Electric Pressure Cleaning Systems
Features:
- 4000 PSI at 4.0 GPM
- Flange/Coupling Drive
- 10 HP TEFC Electric Motor: 220V – 1ph -1.15 Service Factor
- 25ft Electrical Cord Length
- Heavy Duty Cam Switch
- 16,000 Cleaning Units
- Electric Start/Stop
- Fully Welded/Powder Coated Steel Portable Roll Cage Frame C/W Heavy Duty Castors
- Adjustable Pressure
- Thermal Relief Valve
- 50’ of High Pressure Hose
- 4 High Pressure Nozzles
- 48” Gun and Wand Assembly
- Dimensions; 46x30x51 Inches
- Weight;470 LBS
| MODEL | PSI | GPM | MOTOR | VOLTAGE | PRICE |
| 11-PW1763 | 4000 | 4.0 | 10 HP TEFC | 220 V | $4,923.75 |
Belt Drive Pressure Washer - 50HZ
Electric Powered Unit
Features:
- 3.5 to 4.3 GPM
- 4000 to 6000 PSI
- 10 to 20 HP TEFC electric motor, 400 Volt, 3 Phase, 50Hz
- 10,000 PSI glycerin filled high pressure gauge
- Safety relief pop-off valve to prevent over pressurizing
- 140 degree fahrenheit heat sensor in bypass for pump protection
- Inline water strainer
- Trigger shut off gun with cool grip
- Stainless steel single wand with side handle
- Heavy Duty steel frame with powder coat paint finish
- 3/8" x 50' high pressure hose with quick disconnect
- Belt driven triplex ceramic plunger pump with oil bath crankcase
- Industrial Unloader valve
- Heavy duty caster wheel kit
- Motor control box with hour meter
- Optional: Auto start/stop $360.00
| MODEL | PSI | GPM | MOTOR | VOLTAGE | PRICE |
| P4400EC | 4000 | 3.5 | 10 HP - TEFC | 400V / 3 Ph / 50HZ | $6,718.75 |
| P4500EC | 5000 | 4.3 | 15 HP - TEFC | 400V / 3 Ph / 50HZ | $7,625.95 |
| P4600EC | 6000 | 4.3 | 20 HP - TEFC | 400V / 3 Ph / 50HZ | $7,792.30 |
| P4600ECRBD | 6000 | 4.3 | 20 HP - TEFC | 230V / 3 Ph / 60HZ | $9,452.45 |
| P4600ECRBDC | 6000 | 4.3 | 20 HP - TEFC | 230V / 3 Ph / 60HZ | $8,394.05 |
Direct Drive Pressure Washer - 50HZ
Electric Powered Unit
Features:
- 3.5 to 4.3 GPM
- 4000 to 6000 PSI
- 10 to 20 HP TEFC electric motor, 230 to 400 Volt, 1 to 3 Phase, 50Hz
- 6000 to 10,000 PSI glycerin filled high pressure gauge
- Safety relief pop-off valve to prevent over pressurizing
- 140 degree fahrenheit heat sensor in bypass for pump protection
- Inline water strainer
- Trigger shut off gun with cool grip
- Stainless steel single wand with side handle
- Heavy Duty steel frame with powder coat paint finish
- 3/8" x 50' high pressure hose with quick disconnect
- Direct driven triplex ceramic plunger pump with oil bath crankcase
- Industrial Unloader Valve
- Heavy duty caster wheel kit
- Motor control box with hour meter
- Optional: Auto start/stop $360.00
| MODEL | PSI | GPM | MOTOR | VOLTAGE | PRICE |
| P4400EC-230-DD | 4000 | 4 | 10 HP - TEFC | 230V / 1 Ph / 50HZ | $5,256.65 |
| P4400ECDD | 4000 | 3.5 | 10 HP - TEFC | 400V / 3 Ph / 50HZ | $5,962.75 |
| P4500ECDD | 5000 | 4.3 | 15 HP - TEFC | 400V / 3 Ph / 50HZ | $6,869.95 |
| P4600ECDD | 6000 | 4.3 | 20 HP - TEFC | 400V / 3 Ph / 50HZ | $7,033.25 |
| P4600ECRDD | 6000 | 4.3 | 20 HP - TEFC | 230V / 3 Ph / 60HZ | $7,943.50 |
UW11-KC4005 Electric Powered Unit
Features:
- 15 l/min (4 GPM) 200 bar (2900 PSI) 3 phase , 50 Hz, 400V with 5,5 kw (7.5HP), 1450RPM motor with elastic coupling
- MEC series electric induction motor, S1 continuous duty with thermal protection integrated on the windings. Motor with high efficiency, therefore, with high performance and lower power consumption. Elastic coupling.
- Inline professional industrial duty pump (with connecting rods), brass head and three ceramic pistons
- 5 m electric cable
- Automatic By-pass valve with pressure regulation.
- 10 m high pressure hose
- Stainless steel lance with automatic gun and quick connection for accessories.
- Professional pressure head with nozzle in hardened steel and detergent suction in low pressure
- Painted steel frame with comfortable and robust carrying handle and built-in 4 l detergent tank
- Support for launce, hose and electrical cable
- TST System
- Internal hour counter
- Parking brake
Call for Shipping Quote
| MODEL | PSI | GPM | MOTOR | VOLTAGE | PRICE |
| UW11-KC4005 | 2900 | 4 | 7.5 HP / 1450 RPM | 400V / 3 Ph / 50HZ | $1,550.00 |
UW11-KC3005 Electric Powered Unit
Features:
- 10 l/min (2.6 GPM) 150 bar ( 2200 PSI) single phase , 50 Hz, 230V with 2.2 kw (3 HP), 1450RPM motor with elastic coupling
- MEC series electric induction motor, S1 continuous duty with thermal protection integrated on the windings. Motor with high efficiency, therefore, with high performance and lower power consumption. Elastic coupling.
- Inline professional industrial duty pump (with connecting rods), brass head and three ceramic pistons
- 5 m electric cable
- Automatic By-pass valve with pressure regulation.
- 10 m x 5/16" high pressure hose
- Stainless steel lance with automatic gun and quick connection for accessories.
- Professional pressure head with nozzle in hardened steel and detergent suction in low pressure
- Painted steel frame with comfortable and robust carrying handle and built-in 4 l detergent tank
- Support for launce, hose and electrical cable
- TST System
- Internal hour counter
- Parking brake
Call for Shipping Quote
| MODEL | PSI | GPM | MOTOR | VOLTAGE | PRICE |
| UW11-KC3005 | 2200 | 2.6 | 3 HP / 1450 RPM | 230V / 1 Ph / 50HZ | $1,450.00 |
Belt Drive Pressure Washer - 60HZ
Electric Powered Unit
Features:
- 4.3 to 5.5 GPM
- 5000 to 6000 PSI
- 20 HP TEFC electric motor, 230/460 or 240/480 Volt, 3 phase, 60Hz.
- 10,000 PSI glycerin filled high pressure gauge
- Safety relief pop-off valve to prevent over pressurizing
- 150 degree fahrenheit heat sensor in bypass for pump protection
- Inline water strainer
- Trigger shut off gun with cool grip
- Stainless steel single wand with side handle
- Heavy Duty steel frame with powder coat paint finish
- 3/8" x 50' high pressure hose with quick disconnect
- Belt driven triplex ceramic plunger pump with oil bath crankcase
- Industrial Unloader valve
- Heavy duty caster wheel, (2) solid rubber wheels
- Motor control box with hour meter
- Auto start/stop
| MODEL | PSI | GPM | MOTOR | VOLTAGE | PRICE |
| P5500ECR | 5000 | 5.5 | 20 HP - TEFC | 240/480V / 3 Ph / 60HZ | $9,945.30 |
| P4600ECR | 6000 | 4.3 | 20 HP - TEFC | 230/460V / 3 Ph / 60HZ | $10,226.10 |
Pressure-Pro Belt Drive Pressure Washers
Belt Drive - Electric Powered Unit
Features:
- 2000 to 7000 PSI at 4.0 GPM
- 5.0 to 20 HP Electric Motor: 230V, 1 or 3 Phase (1 year warranty)
- Pump: General (5 year warranty)
- Belt drive
- 8,000 to 16,000 Cleaning Units
- Chemical Injector
- Adjustable Pressure
- EZ-Start
- Start-Stop Buttons in NEMA 4X Enclosure w/ 12’ wire (no plug)
- Thermo-sensor (Prevents Overheating in Bypass Mode)
- 50 FT Steel Braided Hose
- 4 Quick-Connect Spray Nozzles and 1 Chemical Nozzle
- Trigger Gun and Wand Assembly
- Hose Hanger
- Dual Padded Shock Absorbing Feet
- 10" Tubed Pneumatic Tires
- Aircraft Aluminum Frame (Lifetime Warranty)
- Stationary (skid) Mount available
- Weight: 205 lbs
- Dimensions: 48"L x 32"W x 36"H
- Assembled and Tested in the USA
| MODEL | PSI | GPM | MOTOR | VOLTAGE | PRICE |
| B4030E1G403 | 3000 | 4.0 | 7.5 HP | 230V / 1 Ph / 33 Amp | $4,198.75 |
| B4040E3G403 | 4000 | 4.0 | 15 HP | 230V / 3 Ph / 34 Amp | $5,256.65 |
| B4070E3G700 | 7000 | 4.0 | 20 HP | 230V / 3 Ph / 46 Amp | $10,411.65 |
Electric Powered Unit
Features:
- 5000 PSI at 5.5 GPM
- 20.0 HP Electric Motor: 460V, 3 Phase, 23 Amps (1 year warranty)
- Pump: General (5 year warranty)
- Belt drive
- 22,500 to 27,500 Cleaning Units
- Chemical Injector
- Adjustable Pressure
- EZ-Start
- Start-Stop Buttons in NEMA 4X Enclosure w/ 12’ wire (no plug)
- Thermo-sensor (Prevents Overheating in Bypass Mode)
- 50 FT Steel Braided Hose
- 4 Quick-Connect Spray Nozzles and 1 Chemical Nozzle
- Trigger Gun and Wand Assembly
- Hose Hanger
- Dual Padded Shock Absorbing Feet
- 10" Tubed Pneumatic Tires
- Aircraft Aluminum Frame (Lifetime Warranty)
- Auto Start Stop Function
- Weight: 380 lbs
- Dimensions: 48"L x 32"W x 36"H
- Assembled and Tested in the USA
| MODEL | PSI | GPM | MOTOR | VOLTAGE | PRICE |
| B5550E3G511 | 5000 | 5.5 | 20 HP | 460V / 3 Ph / 23 Amp | $7,917.70 |
Protect yourself and your investment
From: $114.80
GFCI's protect people and equipment by interrupting potentially lethal ground circuits exceeding 6mA. The dangers of electrical shocks have been long known - GFCI's are the only real way to be safe. Most city & county codes now require GFCI protection on power cleaning equipment.
Consumers should not use "adapter plugs" to connect the three-wire plug to a two-prong household receptacle without properly grounding the adapter plug. Learn more about ground fault current interrupters.
From: 
for Pricing
Magnetic Starter with Auto Start / Stop Function and Manual Overload (keeps the motor from ever heating) with Reset Switch.
Due to sensitivity of the electrical components and connections please allow/hire a certified local electrician to connect the Magnetic Starter Kit to your pressure system. If any of the components should burn up due to improper installation, there will be no returns or warranty issued. The manufacturer will not cover this item; therefore, Ultimate Washer Inc will not be able to cover it either. Items usually ship within 7 days.
If you have any questions regarding the model differences or technical specifications please call our Customer Service Line at Toll Free 866-858-4982 or send us an email at: info@ultimatewasher.com
Hand Carry Pressure Washer | Cold Electric Pressure Washers | Electric Pack-A-Round |
Large Electric Pressure Washer | Auto Start/Stop Power Washer | Wall Mount PowerWashers