Sludge Pumps / Muck Scuppers

ST-35 Pit Boss Sludge Sucker

Sludge Sucker uses a high pressure water stream (1000-4000 PSI) to suck the sludge off the bottom of pits or tanks and eject it through a 1-1/2" (15 FT. long) hose to a disposal tank.

The Sludge Pump is a great tool for cleaning up water and slurries. Simply attach the pressure line from a portable power washer or car wash bay. The water flowing through the high pressure nozzle creates a powerful venturi suction that vacuums up slurry solutions. Debris as large as 3/4" will pass through the casting and out the discharge hose.

The base unit attaches to the end of a pressure washer lance with a 1/4 inch quick coupler for extension to the bottom of the pit. Uses a 0 tip for suction/power ejection. Base unit measures 6" long and 4" wide.

• Min/max water flow: 36 PM - 86 PM
• Min/max pressure: 1000 PSI - 4000 PSI
• Uses standard 1/4" MPT nozzle
• Easy to change for different plumbing system flows and pressures.
• 4.5 orifice MEG Spray Nozzle
• Vacuums up liquid slurries at a ratio of about 1:11 (Example: using 4 GPM will produce an output of 44 GPM
• High pressure creates more lift (Example: 1000 psi will lift water 10 feet while the max. 4000 psi will lift it 30 feet.)
• Cleans up solutions/slurries without damage to your pressure pump.

MODEL	DESCRIPTION	PRICE
8.711-112.0	ST-36 Pit Boss with 15 FT. hose and 4.5 orifice spray nozzle	$216.95
8.711-110.0	Base unit only - w/o hose, nozzle or quick coupler	$160.10

Muck Scuppers

• Min/max water flow: 36 PM - 86 PM
• Min/max pressure: 2000 PSI - 4000 PSI
• Uses standard 1/4" MPT nozzle with orifice op, attachment takes less than 10 seconds to connect to your wand
• Durable stainless steel scupper will not break, corrode, or rust for heavy industrial usage.
• Scupper can loosen muck like a scraper. Scupper measures 6" long and 4" Wide.
• Attached with a 1/4" male plug quick connect fitting. No tools required.
• Supplied with a 1-1/2" Heavy Walled Suction Hose 15 Feet in Length. (Other lengths available, call for details)
• Converts your pressure washer to a high volume water pump for water/sludge removal.
• Capable of extracting water vertically up to 24 feet.
• Can evacuate water, sludge, and gravel up to 20 ft up if desired.
• Also can be used as a sump pump to remove mud, paint, or chemicals without damaging your pump
• All substances run through the tip of your attachment, not through internals of your machine.
• Other applications include cleanout of car wash sump pits, drains fountains or ponds, and small pools for cleaning.
• 2 GPM Minimum flow needed

MODEL	DESCRIPTION	PRICE
ANS04	Muck Scupper with 4.0 Orifice Nozzle	$156.45
ANS55	Muck Scupper with 5.5 Orifice Nozzle	$156.45

*Sorry, no free freight to TX, Please call 866-858-4982 for rate.

These items require California sales tax to be added to CA delivery.